Serial/Parallel Combo PCI Express Card • User Manual
Thank you for purchasing the MANHATTAN
158183. For a datasheet with specifications, go to www.manhattan-products.com.
System Requirements
• Windows 2000/XP/Server 2003/Vista/7 32/64 bit
• PCI Express-enabled system with 1 available PCI Express slot and 2 PCI breakout panels
Driver Installation
1. Insert the included driver CD into the computer's CD-ROM drive.
2. On the computer desktop, go to Start, then Run.
3. • For a 32-bit system, enter "D:\PCIe\MCS9901\XX\PCIeSetup32.exe" (replacing "XX"
with your system designation, such as "XP" for Win 2000, XP and Server 2003 or
"Vista32"). Then click "OK. "
• For a 64-bit system, enter "D:\PCIe\MCS9901\XX\PCIeSetup64.exe" (replacing "XX"
with your system designation, such as "XP64" for XP-x64 and Server 2003-x64 or
"Vista64"). Then click "OK. "
4. Click "Install" to install the drivers.
5. Click "Exit" to complete the driver installation.
6. Shut down the computer.
7. Place the PCIe card into the PCIe slot, then power on the system. Windows will
automatically start installing the driver software.
Verification of Driver Installation
1. Right-click on "My Computer, " then click "Manage" and "Device Manager. "
2. Click on "+" in front of "Ports (COM & LPT)" and confirm that "High-Speed PCIe Serial Port"
is listed twice and that "PCIe ECP Parallel Port" is listed once.
Card Installation
1. Turn off your computer.
2. Unplug the power cord and remove your
computer's cover.
3. Remove two slot brackets,
with one from an available
PCIe slot.
4. Carefully align the card's bus
connector with the selected
PCIe slot on the motherboard.
Push the board down firmly.
5. Connect the ribbon cable from
the parallel connector to the
board's parallel connector.
6. Replace the slot bracket holding screws to secure the card and the
parallel port bracket.
7. Replace the computer cover and reconnect the power cord.
2
English
Serial/Parallel Combo PCI Express Card, Model
®
Serial ports
English
Parallel
port