Mac Installation - Manhattan 150965 Guía De Instalación Rápida

Ocultar thumbs

página de 12

/ 12
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

SATA 3 Gb/s RAID PCI Express Card • Quick Install Guide

Thank you for purchasing the MANHATTAN

Card, Model 150965 (2 external ports) or 160377 (2 internal ports).

This guide presents the basic steps to set up and operate this device. For detailed

instructions and specifications, refer to the user manual on the CD enclosed with

this product or visit www.manhattan-products.com.

Installation

1. Turn the system off. Connect the hard drives to the PCI Express Card and

position the card in a PCI Express slot. Turn the system back on.

2. During OS bootup, Windows will display the Found New Hardware Wizard

screen. Click "Next. "

3. Select "Search for a suitable driver for my device (Recommended)" and

click "Next. "

4. Insert the driver CD in your CD-ROM/DVD drive; check "Specify a location";

uncheck the other boxes: click "Next"; type in "E:\" (or whatever designates

your CD-ROM/DVD). Click "Browse. "

5. Select a location; e.g., "E:\SATA PCIe_Raid5_2Port\SiI3132\Windows\

Driver. " Click "Open, " then "OK. "

6. When the wizard indicates that it found a driver for the device, click "Next. "

7. If the "Digital Signature Not Found" message appears, click "Yes" to

continue installing the driver.

8. The wizard will now copy the required files to the system and start the

driver. When the wizard displays a completion screen, click "Finish" to exit

the wizard.

Verifying the Installation

1. Right-click on "My Computer"; select "Properties"; click the "Hardware" tab;

click "Device Manager. "

2. Double-click "SCSI and RAID Controllers. " If there is no yellow "!" or "?" in

front of "Silicon Image SiI 3132 SoftRaid5 Controller, " the driver has been

installed correctly.

3. For information about the devices attached to the card, use the SiICfg

Utility and select a device from the list.