GETTING STARTED
Extension Cords
Avoid use of extension cords. If use of an extension cord cannot be avoided, the
cord should be a minimum wire size of 14 AWG and no longer than 100 ft.
Use only a 3-blade grounding plug, and a 3-slot receptacle that will accept the
plug on the product.
Check extension cords before each use. If damaged, replace immediately.
Never use this product with a damaged cord. Touching the damaged area could
cause electrical shock resulting in serious injury.
Break In Procedures
No break in procedure is required by the user. This product is factory tested to
ensure proper operation and performance.
INSTALLATION
Figure 3
Grounded Outlet
Box
Grounded Outlet
120 VOLTS
Plug
14- ENG
Grounding Pin