Conceptronic C54APM Guia De Inicio Rapido página 30

ENGLISH
Back Panel
Access Point's connection ports are located on the back panel. Below is the description of
each connection port.
Antenna Connector
This round connection is standard Reverse SMA connector where any antennas with
Reverse SMA connector can connect to the Access Point.
2 DC Adapter Port
Insert the power jack of the power adapter into this port.
3 LAN Port
The Access Point's LAN port is where you connect to your LAN's network devices.
4 Reset
The Reset button allows you to do one of two things.
1 If problems occur with your Access Point, press the reset button with a pencil tip (for
less than 5 seconds) and the Access Point will re-boot itself, keeping your original
configurations.
2 If problems persist or you experience extreme problems or you forgot your
password, press the reset button for longer than 5 seconds and the Access Point
will reset itself to the factory default settings (warning: your original configurations
will be replaced with the factory default settings).