Conceptronic C54APM Guia De Inicio Rapido página 42

ENGLISH
Security
Advance setting
Access Filter
Click Apply button at the bottom of the screen to save the above configurations. You can now
configure other advance
sections or start using the Access Point.
Channel 1-11 (North America)
Channel 1-14 (Japan)
Channel 1-13 (Europe)
There are 14 channels available.
Disable: Disable the security function.
WEP: WEP is an authentication algorithm,
which protects authorized
LAN users against eavesdropping. The
Authentication type and WEP key of wireless
stations must be the same with the Access
Point. This Access Point supports 64/128-bit
WEP Encryption function. With this function,
your data will be transmitted over the wireless
network securely.
# You can refer to the detail setting from
chapter 3.2.6.
WPA: You can use a pre-shared key to
authenticate wireless stations and encrypt data
during communication. When you enabled
WPA mode, you can not use WEP encryption.
# You can refer to the detail setting from
chapter 3.2.7.
It provides more powerful features for you to
configuring.
# You can refer to the detail setting from
chapter 3.2.8.
This Access Point allows you to provide a Filter
List of MAC addresses that are allowed
associating with this AP.
# You can refer to the detail setting from
chapter 3.2.9.
Wireless