Installation Guide - Enso Sleep Systems PB175 El Manual Del Propietario

installation guide

STEP 1
With the help of an able-bodied assistant, place the carton on the
floor with the arrows pointing downwards.
Remove the binding straps and packing materials, making sure not
to puncture the box with any sharp objects.
STEP 2
Remove the bed base from the box keeping the bottom of the
base facing upwards.
For customer support, visit www.ergomotion.com or call: 1-844-534-3676
Always use two people when setting up the base.
STEP 3
To install the legs, unscrew the spacer on the four bed leg hole
sites, thread the washer over the bolt of the leg with the recessed
side facing the leg, and tighten by hand. Do not over tighten.
9 inch leg
9 inch
leg install
3 or 6
inch leg
install
3 inch leg
6 inch leg
7