Garden Treasures NCZH-G-KMZMSS Manual Del Usario página 9

ASSEMBLY INSTRUCTIONS
8. WARNING:Remove protective cover before
assembling.
Note: If necessary for proper alignment of reflector
sections, loosen each bolt prior to further assembly
and retighten after sections are aligned.
9. Attach reflector panels (A) together using
M6 x 10 mm screws (II) and Φ6 washers (HH).
Secure loosely with cap nuts (JJ).
Hardware Used
Φ6 Washer
HH
II
M6 X 10 mm Screw
JJ
Cap Nut
10. Attach reflector plate (B) to reflector panels (A)
using M6 x 10 mm screws (II) and Φ6 washers (HH).
Secure loosely with cap nuts (JJ). Once properly
aligned, tighten all screws and the preassembled bolts.
Hardware Used
Φ6 Washer
HH
II
M6 X 10 mm Screw
JJ
Cap Nut
8
9
JJ
HH
II
x 3
x 3
x 3
10
x 6
JJ
HH
x 6
II
x 6
9
A
B
Lowes.com
R