Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Measurement finished and the result is displa-
yed.
Rotate the wheel,clamp a counterweight of
the displayed value(eg:70g)on the outside co-
rrection position.
Keep
rotating,clamp
of
the
displayed
on
the
inside
The three values from left to right shown in fi-
gure 14 are unbalance value of the inside rim,
static value and unbalance value of the outside
rim respectively. When the left and right unba-
lance values are 0 and the middle static value is
more than 5g, by pressing FINE key the unba-
lance values less than 5g after standard dyna-
mic balance will be displayed on the left and
right side of the screen. Now it is recommen-
ded to do static balance to achieve complete
a
counterweight
value
(eg:40g
correction
position
balance.
STATIC MODE
After dynamic mode measurement, select sta-
tic mode directly. The balance will automatica-
lly calculate the result of static mode.
First,
choose
static
tall
the
Wheel
and
after
that
follow
mode,
then
ins-
input
parameters,
the
process
below.
25
Publicidad
Tabla de contenido
