For Your Safety - Wurth Master WAS 80 Instrucciones Para El Manejo

0703 261 0.book Seite 8 Donnerstag, 29. Mai 2008 3:28 15
GB
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future refe-
rence.
Working safely with this machine is
possible only when the operating and
safety information are read com-
pletely and the instructions contained
therein are strictly followed.
Wear safety goggles.
Wear protective goggles, ear protec-
tion.
Wear protective gloves.
Dangers that can happen when a compressed air
line is mounted to the tool:
Each time before putting into operation, check
the machine, connection and compressed air
hose for damage.
Only mount the compressed air when the tool is
switched off. Cut the compressed air connection
when changing the tool, during maintenance
and after use.
Never direct the compressed air towards
yourself or other people. Whipping hoses can
cause serious injuries. Always make sure that
hoses and connecting pieces are not loose or
damaged.
Do not install the tool unless an easily accessible
and easily operable on/off valve is incorpora-
ted in the air supply.
Do not fit any other abrasive or cutting device
before checking the suitability for use with this
tool with the manufacturer or the manufactu-
rer's authorised supplier.
8

For Your Safety

Do not attempt to use any bonded abrasive de-
vices, i.e. grinding wheels, as those which
could be fitted because of their size, cannot be
used without a suitable guard. A guard is not
available for this tool.
Do not modify this tool for other use before che-
cking the intended alternative use with the ma-
nufacturer or manufacturer's authorised sup-
plier.
Make sure that the tool does not connect to the
air supply before fit an abrasive disc to the tool
and the dead handle is tightened sesurely.
Dangers during operation:
Never mount other grinding tools at the place of
the grinding disc. This tool does not have the
appropriate protections to this effect. The use of
not admissible grinding tools can cause serious
injuries or death.
Only use grinding discs that are admitted for
the speed of this tool. Observe the dimensions
of the grinding discs.
Check the grinding disc prior to every use. Do
not use the tool if it has cracks or is otherwise
damaged.
Do not touch the grinding disc during operati-
on.
Do not continue to use abrasive discs that are
clogged or worn as this will make the sanding
process inefficient and the need to apply unne-
cessarily high forces to the tool.
Dangers at the working zone:
Use personal safety equipment.
Take care against entanglement of moving
parts of the tool with clothing, ties, hair, clea-
ning rags etc. This will cause the body to be
drawn towards the tool and can be very dange-
rous.
When water comes out at the gear collar or at
other locations of the machine than intended
for, stop working with the machine and have it
checked by an authorized customer service
agent for Würth compressed-air power tools.
Always guide the machine with both hands.