LUCCI FUTURA ECO Manual De Instrucciones De Instalación página 7

Futura Eco Installation Instructions
4. Cover the mounting bracket with the canopy cover. Ensure all electrical wirings are tucked inside the canopy
and that it is not damaged during this step then secure with screws. Fig. 6
Finally attach the canopy cover to the canopy screws by turning it clockwise. Fig. 6
5. Insert the blades through the side slot of the motor and align with the 3 holes. If the holes do not align, the blade
is upside down. The blade should fit securely and the screws should slot into the blade screw holes. Insert the
screw driver with the screw through the key hole of the lamp bracket. Secure the blades with 3 blade screws.
Ensure all screws are tightened evenly to reduce the chance of warping or unbalancing. Repeat this process
for all blades. Fig. 7
6. Attach the LED light kit to the lamp base and connect wires to the LED light kit via the quick connectors. Insert
the housing assembly screws into the larger ends of the key hole slots and turn the LED light kit body clockwise
until the housing assembly screws are firmly situated in the narrow ends of the keyhole slots. Fig. 8
6 | P a g e
Fig. 8
Fig. 6
Fig. 7
V 1 . 0