Maintenance And Repair - ALFRA ROTABEST V 32 Instrucciones De Uso

12. Cleaning
Risk of injury by accidental switching on. Pull plug prior to maintenance work.
Keep the cooling liquid separate from the control box.
Clean and oil lateral guide rods regularly.
Carbon brushes should be replaced after appr. 250 hours running time.
When not in use we recommend to store the Metal Core Drilling Machine V32 in the
transport case.

13. Maintenance and repair

a) Maintenance, check and repairs are only to be made by electronics specialists
according to the valid regulations of the respective country.
The Metal Core Drilling Machine ALFRA ROTABEST should be serviced after
appr. 250 hours running time by our Alfra workshop or appointed dealers.
Only use genuine ALFRA spare parts.
b) ALFRA Service
If you need to service your Metal Core Drilling Machine – No Problem.
Please send your machine together with a short list of defects to our service
department. We will check the machine, send you an estimate and repair the
machine as quick as possible.
Please call us with your technical questions or questions regarding
accessories.
7