Contents Of Carton - Cub Cadet 49A70001100 Manual Del Operador

Thank You
Thank you for purchasing a bagging attachment. It was carefully engineered to provide excellent performance when properly operated and maintained.
Please read this entire manual prior to operating the equipment. It instructs you how to safely and easily set up, operate and maintain your equipment. Please be sure that you, and any other persons who will
operate the machine, carefully follow the recommended safety practices at all times. Failure to do so could result in personal injury or property damage.
All information in this manual is relative to the most recent product information available at the time of printing. Review this manual frequently to familiarize yourself with the equipment, its features and
operation. Please be aware that this Operator's Manual may cover a range of product specifications for various models. Characteristics and features discussed and/or illustrated in this manual may not be
applicable to all models. We reserve the right to change product specifications, designs and equipment without notice and without incurring obligation.
If you have any problems or questions concerning this equipment, phone your local dealer or contact us directly. We want to ensure your complete satisfaction at all times.
right
Throughout this manual, all references to
48" Triple Bagger
Before beginning installation, remove all parts from the carton to make sure
everything is present. Carton contents are listed below and shown in Figure 1. The
hardware pack(s) included in this kit are detailed at the end of this section.
• Boot Assembly - 819-011300
• Grass Bag Assembly (3) - 664-05104
• Vertical Bagger Support - 683-04519C
• Hanger Assembly - 683-04498B
• End Plugs (6) - 735-0246A (pre-installed)
• Bagger Cover - 631-06539
• Bagger Screen - 731-06504
• Upper Chute Support - 731-17272
• Strut Bracket (2) - 789-04278
• Lower Bracket - 789-04279
• Upper Bracket - 789-04458
• Deflector - 731-18471
• Hose - 764-05275
• Hinge Pin - 711-05079
• Keeper Bracket - 689-02519
• Mounting Plate - 689-02559
• RZT Bagger Weight - 719-04271A
• Weight Plates (3) - 789-02137
• Weight Hanger Bracket Left - 789-04077
• Weight Hanger Bracket Right - 789-04078
• Hardware Pack - 689-02619
• Deflector Hardware Pack - 689-02299

CONTENTS OF CARTON

left
and side of the machine are observed from the operating position.
Figure 1
54"/60" Triple Bagger
Before beginning installation, remove all parts from the carton to make sure
everything is present. Carton contents are listed below and shown in Figure 2. The
hardware pack(s) included in this kit are detailed at the end of this section.
• Boot Assembly - 819-011280
• Grass Bag Assembly (3) - 664-05104
• Vertical Bagger Support - 683-04519C
• Hanger Assembly - 683-04498B
• End Plugs (6) - 735-0246A (pre-installed)
• Bagger Cover - 631-06539
• Bagger Screen - 731-06504
• Upper Chute Support - 731-17272
• Strut Bracket (2) - 789-04278
• Lower Bracket - 789-04279
• Upper Bracket - 789-04458
• Deflector - 731-18471
• Hose - 764-05275
• Hinge Pin - 711-05079
• Keeper Bracket - 689-02519
• Mounting Plate - 689-02559
• RZT Bagger Weight - 719-04271A
• Weight Plates (3) - 789-02137
• Weight Hanger Bracket Left - 789-04077
• Weight Hanger Bracket Right - 789-04078
• Hardware Pack - 689-02619
• Deflector Hardware Pack - 689-02299
4
Figure 2