Date/Time Setup - Velleman VQS4CRT3 Manual De Instrucciones

Submenus:
TITLE SETUP

DATE/TIME SETUP

DECODER SETUP
SENSITIVITY SETUP
EVENT LIST
AUTO SEQUENCE
OTHER
KEY LOCK
A title consists of a max. of 8 letters. This function can also be deactivated by entering 8 x the "□" character.
Date format: YY-MM-DD (year/month/day). Leap years are taken into account.
Time format: HH-MM-SS (hours/minutes/seconds)
You can set the following parameters: brightness, contrast, sharpness, sat-U, sat-V and hue. Per channel, seven
levels determine the sensitivity of the motion detector and you can also select OFF to disable the motion detection
function. Select a channel with ▲and ▼and set the sensitivity with + or -. The system will raise the alarm by
activating the alarm output when motion is detected. The alarm duration can be set from1 to 99 seconds (see
"OTHER" below).
Two pages are available for the "event list" and a max. of 10 events can be listed per page. The registered data are:
channel no., event category (A for alarm, L for loss or M for motion), date and time. Switch pages with ▲and ▼. The
most recent event is always the first on the list.
Use this submenu to activate or deactivate the auto sequence function. Each channel can be set to ON or OFF and
the dwell time is adjustable from 1 to 99 seconds.
This submenu allows the user to change the settings for the buzzer, to select mirror image for channels 1 - 4 and to
choose the colour of the lines separating the quad pictures from each other (off/white/black).
1. Buzzer: Loss: 0.5s
Motion: 0.5s
Alarm: 0.5s
2. Mirror: Channel 1: OFF (ON: mirror is ON)
Channel 2: OFF
Channel 3: OFF
Channel 4: OFF
3. Border: black/white/OFF
Press the ▲, ▼, + and - to lock/unlock the all buttons. All buttons are locked when the KEY LOCK feature is ON.
Return to the KEY LOCK submenu and select OFF to restore normal operation of the buttons.
VQS4CRT3
TITLE SETUP
DATE/TIME SETUP
DECODER SETUP & SENSITIVITY SETUP
EVENT LIST
AUTO SEQUENCE
OTHER
KEY LOCK
3
VELLEMAN