Signamax Connectivity Systems 065-1755 Manual De Instrucciones página 10

4. Click "Apply" button to finish the Setup if you have something
change. The follow screen would appear to notify you the system is
rebooting. All changes will be taken effect while reboot procedure is
completed.
5. While the AP reboot procedure is completed, you may change the
TCP/IP properties of this computer. Select the "Obtain an IP address
automatically" instead of "Use the following IP Address " item if
your local network has DHCP server service to assign IP address for
your wireless client. This step will set your computer as DHCP client
and get IP from your DHCP server via AP.
If there is no DHCP server in your network, then you should assign
one proper IP address manually to fit your network IP subnet.
9