Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2
27
1.
If necessary, disconnect the steam generator (8) from the extension rod (4) by pressing
the release button (5).
2.
Select the required attachment. When using the brush (27), round brush
(small & large) (28, 29), spatula (30) and nozzle attachment (31), please ensure the
adapter attachment (26) is also being used.
3.
Plug the adapter attachment (26), if required, onto the steam nozzle (11) of the steam
generator (8). When placed correctly, a "click" will be audible. To remove the attachment,
press the release button located on the larger side of the attachment. Press the button
and pull the attachment away from the steam generator (8).
4.
Place the selected attachment on the small nozzle of the adapter attachment (26), aligning
the arrow found on the selected attachment with the notch on the adapter attachment
(26). Once aligned, push the selected attachment onto the adapter attachment (26) as
far as possible, and then rotate the selected attachment 90° clockwise. Remove an
attachment by turning it 90° anticlockwise and lifting it of the adapter attachment (26).
5.
Connect the plug (22) with a suitable wall outlet.
Steam Mop_56001(Z08336)_US+ES_IM_V1_130522.indb 7
OPERATION
26
28
29
30
31
7
15
17
16
5/22/13 5:03 PM
Publicidad
Tabla de contenido
Solución de problemas
