Twin Needle Sewing (Optional) - Baby Lock Natalie A-LINE Serie Guía De Instalación Y Referencia

1
•
1
3
4
2
5
6
58
2 3
4
5
•
q
w

Twin Needle Sewing (Optional)

Pattern selector:
1
Presser foot:
2
3 Thread tension:
Stitch length:
4
Twin needle:
5
CAUTIONS :
* Turn off the power switch before changing the
needle.
* When sewing with the twin needle, test the stitches
on a scrap fabric before sewing on the actual fabrics.
* Set stitch width at center of zigzag width setting, or
the needle will hit the needle plate and the needle
will break
.
1. Draw threads from the spools and pass them
through the points from 1 to 6 .
Thread each thread separately so not to tangle the
two strings of thread.
q
Presser foot lifter
2. The threading paths from 1 to 4 are the same
as single needle.
3. Slip one of the threads into the needle bar thread
guide on the left, and the other on the right.
w
Thread Guide
4. Thread the needles from front to back.
* Do not use needle threader with twin needle.
* When changing the sewing direction, raise the
needles out of the fabric and turn the fabric.
B, C
Zigzag foot
1–4
0.5–1
2LP-90 (2.0 mm left shank)