Publicidad
Idiomas disponibles
Idiomas disponibles
MOD.
....................................................................................................................
. . .
TECHNICAL SPECIFICATIONS
- Air fitting: G 1/4" M
- Product delivery fitting (version SP): G 1/4" M
- Maximum air pressure: 5 bar (73 psi)
- Maximum product pressure (SP version): 5 bar (73 psi)
Feed
Ø
SP version
1.7
SP version
1.9
. . .
U SE
Spray gun 9010 sp COLLA has been designed for special applications. Particularly indicated for the application of liquid glues.
The instrument is not suitable for applying products that may contain acids or petrol of any kind.
The spray gun can be used in connection with a pressurised tank or a specific pump.
To obtain the best results, the following instructions must be followed carefully:
1. When possible, use an air pipe with a minimum internal section of ø 8 mm (0.3").
2. Make sure the compressed air used is perfectly filtered removing all water, oil or other impurities (for example, by installing
an Asturomec filter regulator ref. 61131 and Asturomec coalescent microfilter ref. 61201, or by the more complete and efficient
WALCOM TD
PRO multifunctional filter and heating unit).
3
. . .
ADVICE FOR CORRECT USE
1. Set the distance between the spray gun and the surface to be treated between 150 e i 250 mm (5.9-9.8").
2. The jet from the spray gun must always be perpendicular to the surface being treated and the product must be applied in
horizontal strokes. Any eventual shift from this position when spraying will result in an uneven application of the product layer.
. . .
ADJUSTMENTS
- Working pressure: 2.5-3.0- bar (36-43 psi)
- Fan: Fully open
- Air: Fully open
- Product: 3 - 3.5 turns
Delivery pressure
2.5-3.0 bar (36-43 psi)
2.5-3.0 bar (36-43 psi)
17
9010 sp COLLA
Air consumption
180-240 Lt./min. (6.4-8.5 CFM)
180-240 Lt./min. (6.4-8.5 CFM)
Publicidad
