Publicidad
SPECIFICATIONS
Power Output: RMS Continuous Power (at 14.4V, 20 Hz to 20 kHz)
Per channel into 4 ohms
Per channel into 2 ohms
Bridged into 4 ohms
Max. Power Output (at 14.4V)
Per channel into 4 ohms
Bridged into 4 ohms
Frequency Response
Signal-to-Noise Ratio
Slew factor
Input Sensitivity
(for rated power output)
Input Impedance
Speaker Impedance
Active Dividing Network
Frequency and Slope
Power Requirement
Bass EQ
Dimensions (W x H x D)
MRP-F320 ........................................................................... 230mm x 58mm x 275mm (9" x 2-1/4" x 10-13/16")
MRP-F200 ....................................................................................... 230mm x 58mm x 230mm (9" x 2-1/4" x 9")
MRP-T130 ................................................................................. 230mm x 58mm x 170mm (9" x 2-1/4" x 6-3/4")
Weight
MRP-F320 ............................................................................................................................ 3.42 kg (7 lbs. 8 oz)
MRP-F200 ............................................................................................................................ 2.93 kg (6 lbs. 7 oz)
MRP-T130 .......................................................................................................................... 2.24 kg (4 lbs. 15 oz)
NOTE:
For product improvement, specifications and design are subject to change without notice.
MRP-F320
40W
50W
100W
120W
(Subwoofer, 20 to 200 Hz)
75W
180W
200 mV to 4.0 V (1.0 V at center detent)
80 Hz, 18 dB per octave
(HP. CH1 – 4)
50 – 200 Hz, 12 dB per octave
(LP. Subwoofer)
(CH 5 only)
MRP-F200
40W
0.08% THD
50W
0.3% THD
100W
0.3% THD
75W
180W
10 Hz to 50 kHz
(+0, –1 dB)
100 dB
(referenced to rated power)
Greater than 5
10k ohms <
4 or 2 ohms (Stereo), 4 ohms (Bridged)
11 – 16 VDC Negative Ground
50 Hz + 8 dB FIX
(CH 3/4)
MRP-T130
80 Hz, 18 dB per octave
50W
65W
130W
90W
240W
Publicidad
