Zyxel PLA401 v2 Guia De Inicio Rapido página 3

1 Connect the PLA401 v2 to a Cable/
DSL Modem or Router
1 Use an Ethernet cable to connect the ETHERNET port on
the PLA401 v2 to an available Ethernet port of your
modem, router or switch.
2 Plug the PLA401 v2 into a
power outlet.
3 The power (
be on and the Ethernet (
LED should be on or blinking.
If none of the LEDs
are on, unplug your
device and recheck
your hardware
connections.
ENGLISH
) LED should
3
)