BH FITNESS G6130 Manual De Instrucciones página 12

ELEVATION.-
The inclination
independently of all other functions.
Each time that you set switch (L) to
position I, as described in the Starting
section, Fig.1. the inclination level that
was last used will be displayed.
To lower the inclination to zero with
the unit stopped, press and hold the
STOP key for 5 seconds.
If inclination is not at zero when the
START key
exercising, the machine will zero itself
while it is starting.
You can adjust the elevation level by
pressing the
[INCLINE▼] keys to specify a value of
0 to 12, depending on how you would
like to do the exercise.
Important: Do
inclination level of your treadmill by
propping it up on objects.
function operates
is used to
[INCLINE▲]
not change
IMPORTANT:
LEVEL MUST BE AT ITS LOWEST
SETTING
TO PUT THE TREADMILL INTO THE
FOLDED POSITION.
PULSE MEASUREMENT.-
Your pulse rate is measured by
placing both hands on pulse sensors
(R) with which the electronic unitis
equipped. The pulse rate readout will
begin appear after a few seconds. The heart
symbol beside the pulse rate value will
flash in time with your heart rate,
Fig.4.
or
IMPORTANT: This is not a medical
appliance and therefore the heart rate
shown
the purposes.
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE.
12
THE INCLINATION
BEFORE ATTEMPTING
is merely for guideline