3M PL100 Guia Del Usuario página 9

Troubleshooting
Review the following possible solutions if you encounter a problem while using your printer.
Problem/Error Message
No display
Poor Print Quality
Poor Cutter Performance
Memory Full
Exceeded maximum number of characters in buffer.
Low Battery
Batteries almost discharged.
Motor Stall
Motor is stalled due to label jam.
www.3m.com/electrical or 1-800-245-3573
Solution
• Ensure the printer is turned on.
• Replace discharged batteries.
• Replace discharged batteries.
• Ensure label cartridge is installed properly.
• Clean the print head.
• Replace the label cartridge.
• Clean the cutter blade. See Cleaning Your Printer.
• Delete some or all of the buffer text.
• Replace discharged batteries.
• Remove jammed label and replace label cartridge.
• Clean cutter blade.
9