Starting To Use The Comfort Contego - Comfort audio Contego T800 Manual Del Usuario

Starting to use the Comfort Contego

1. When the Comfort Contego is
fully charged - start the receiver
by pressing the button for about
2 seconds.
2. Then connect the neck loop
and turn the hearing aid to the
T-position. Use the headphones
instead of the neck loop if you
don't use hearing aids.
3. Picking up sound via the built
in microphones in the receiver.
Set the audio level by means of
the right hand volume controller.
(see page 6)
(Note! Start listening at a low
volume.)
10
Select the directional or omnidirec-
tional microphone with the arrow
buttons in the middle (see page 6).
Place the receiver on a table or aim
it at the person you want to listen to.
Choose directional or omni-
directional settings depending
on the situation. Normally in noisy
surroundings directional setting is
preferred.
4. Picking up sound by means of
transmitter. When the distance be-
tween you and the speaker /sound
source is longer, let the person you
want to hear use the transmitter.
Set the audio level by means of the
left hand volume controller.
(see page 6)
(Note! Start listening at a low
volume)
(When the transmitter or receiver is
turned on, the most recent settings
for volume and microphone type are
automatically selected)
11