Control Panel - Thulos TH-KB12 Manual De Instrucciones

CONTROL PANEL

(Remote controller control panel with the same function as the unit control panel)
Insert the plug pin into a wall socket and turn on the power switch which is at the side
of the unit. A small beep sound can be heard and the power indicator will be on.
ON/OFF: Press once this button to make the unit ready for working. It will start up
with MID in 3 seconds and then revert to work under the memorized status. If for first
time use, it will start up with MID in 3 seconds and then work with LOW. Press again
this button to turn OFF.
SPEED: Press this button to select desired fan speed, LOWMIDHIGHLOW, in
turn. At the same time can digital display 1.2.3.
MODE: Press
NATURESLEEPNORMALNATURE, In turn. The corresponding wind mode
indicator will be displayed.
(1) NORMAL: It works as per the selected fan speed (HIGH, MID, LOW).
(2) NATURE: It works as per the presetted computer program, imitating the
natural irregularly wind.
(3) SLEEP: It works as per the presetted computer program, alternating between
different fan speed.
 If it is selected HIGH, the unit will work under HIGH NATURE wind mode
for half an hour, then revert to work under MID NATURE wind mode for
half an hour and then revert to LOW NATURE wind mode.

If it is selected MID, the unit will work under MID NATURE wind mode for
half an hour, then revert to LOW NATURE wind mode.
this button to select desired wind mode,