Bebeconfort RodiFix Modo De Empleo/Garantia página 18

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 33
Your child in the Bébé Confort RodiFix
1. Never leave your child unattended.
2. Always secure your child with the seat belt.
3. E nsure that the car seat belt lies as low as possible under the
stomach, to properly support the pelvis.
4. Make sure the headrest is adjusted to the proper height.
5. B efore every use, make sure the car seat belt is not damaged or
twisted.
6. R emove all objects from the child's coat and trouser pockets so
they cannot get stuck between the child and the car seat belt. Such
objects could cause injury in case of an accident.
7. T ell your child not to play with the seat belt buckle and to keep its
head against the headrest.
WARNING : Never adjust the recline position of the Bébé
Confort RodiFix whilst your child is in it.
WARNING: After fastening and adjusting the RODIFIX seat
with Isofix Connectors onto your vehicle's ISOFIX
fastening points, you may encounter difficulties moving
it from the lie-flat position to the seated position and vice
versa. This inconvenience may be due to your vehicle's
seat type.
In this event, please do the following:
- check that your vehicle's headrest has been removed
- then unlock the Isofix connectors from the vehicle's
ISOFIX fastening points
18
EN
- adjust to the desired reclining position (seated or lie
flat)
- lock the Isofix Connectors back onto the vehicle's ISOFIX
fastening points.
Fastening the Bébé Confort RodiFix with the ISOFIX-connectors
using the ISOFIX system from the vehicle.
ISOFIX-connectors have been developed to ensure secure and easy
fastening of the child systems in the car. Not all cars have an ISOFIX
child restraint system. Please consult the car manufacturer's handbook.
Consult the attached list of cars in which it has been checked that the
seat can be installed correctly. Future updates of this list can be
checked on the website www.bebeconfort.com.
Bébé Confort RodiFix in the car
1. U se the Bébé Confort RodiFix only on a front-facing seat that is
fitted with an automatic or static 3-point belt that has been
approved according to the ECE R16 standard or similar. Do NOT
use a 2-point belt.
2. M ake sure the car seat can be installed properly in your car before
purchasing it.
3. A lways fully install the Bébé Confort RodiFix with the car seat belt,
even if there is no child in it.
4. Deactivate the airbag if using the Bébé Confort RodiFix on the
front passenger seat. If this is not possible, place the passenger
seat in the earmost position.

Publicidad

Tabla de contenido
loading

Tabla de contenido