Pre Operation; Operation; Starting; Feeding Procedures - Skymsen EX SUPER Manual De Instrucciones

Make sure the network voltage is the same as indicated on the cord label.

2.2 Pre Operation

Before to use the equipment all the parts to be in contact with the product shall be washed
with water and neutral soap ( see item 3.3 Cleaning )
Make sure the equipment is stable on the working surface .

3. Operation

3.1 Starting

Make sure the Crown is properly fitted.
To start the operation, turn on the ON/OFF Switch # 05 (Pic-1), located on the Base # 06
(Pic-01).
Always wait until the motor complete stop before changing the crown.

3.2 Feeding Procedures

Juice Extractors work with high speed. First, cut the oranges or the lemons in two halves.
Turn the machine on, hold half of the fruit and press it down firmly against the crown # 09
or # 10 (Pic-01) and the juice will run into the cup # 08 (Pic-1) going first through the sieve
# 07 (Pic-01).

3.3 Cleaning and Sanitizing

Never clean the machine when it is connected to the power point, always unplug
IMPORTANT
IMPORTANT
IMPORTANT
the machine before cleaning.
7