Recalling Stored Labels And Formats; Caring For Your Labelmaker - Dymo LabelManager 350 Guia Del Usuario

Ocultar thumbs Ver también para LabelManager 350:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

A list of ten fields, which represent memory
locations, are displayed. Fields that contain formats
display a name in the field. You can store new
formats in any of the fields, however, if you select a
location that is filled, the previous label format will
be overwritten.
3. Select a field and press OK. The word NAME?
appears in the field.
4. Enter a name for the format and press OK. Your
label format is saved and you are returned to the
label.

Recalling Stored Labels and Formats

You can easily recall labels and formats stored in
memory to use at a later time.
To recall labels or formats
1. Press Memory.
2. Select Recall and then LABEL, FORMAT, or LAST
PRINTED.
A list of memory locations is displayed similar to
storing a label or format.
3. Select a label or format to recall and press OK.

Caring for Your Labelmaker

Your labelmaker is designed to give you long and
trouble-free service, while requiring very little
maintenance.
Clean your labelmaker from time to time to keep it
working properly. Clean the cutter blade each time you
replace the tape cassette.
To clean the cutter blade
1. Remove the tape cassette.
2. Press and hold down the cutter lever to expose the
cutter blade.
3. Use a cotton ball and alcohol to clean both sides of
the blade.
4. Release the cutter lever.
You can also follow this procedure if the cutter
blade becomes lodged in the forward position and will
not move.
To clean the print head
Clean the print head using the cleaning tool located
inside the tape compartment lid.
11

Publicidad

Tabla de contenido
loading

Tabla de contenido