Brandson Equipment 303738 Manual Del Usuario página 8

The clips automatically attach themselves to the edges of the hole, thereby
giving the recessed spotlight the necessary hold.
4. When the installation is complete, you must re-activate the previously
deactivated fuse.
5. Thanks to the high flexibility of the recessed light, you can change the
lighting direction and tilt the device to the required side. The spotlight is
now ready for operation.
CAUTION!
5. Safety instructions and Disclaimer
Note: During assembly, please keep a safe distance of at least 5cm between the
lamp and the ceiling (cavity)! If necessary, please inform yourself in advance
about the properties and heat tolerance of the building material or the insulating
material!
Do not operate the device in areas above 35°C or below 10°C. Do not expose the
product to excessive heat, moisture or dust. Never use solvents or strong deter-
gents when cleaning. Use a damp cloth. Never attempt to open the device for re-
pairs or modifications. Never try to open the device to carry out repairs or conver-
sions. Avoid contact with mains voltages. Do not short-circuit the product.
8
English