Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

3730 series LED heads are compact yet versatile high intensi-
ty directional LED warning lights suitable for mounting any-
where on a vehicle. Colorless until illuminated, these discrete
LED heads feature urethane encapsulated electronics offering
a high degree of environmental and vibration protection.
Additional benefits of these LED lights include low current
draw, a long and maintenance free service life with reliable
solid-state operation and extremely low electromagnetic emis-
sions. These LED heads feature 12-24V operation, multiple
user-selectable flash patterns and synchronization capability.
!
WARNING!
Failure to install or use this product according to manufacturers recommendations may result in property
damage, serious bodily/personal injury, and/or death to you and those you are seeking to protect!
Do not install and/or operate this safety product unless you have read and understand the
safety information contained in this manual.
1. Proper installation combined with operator training in the use, care, and maintenance of emergency warning devices are
essential to ensure the safety of you and those you are seeking to protect.
2. Exercise caution when working with live electrical connections.
3. This product must be properly grounded. Inadequate grounding and/or shorting of electrical connections can cause high
current arcing, which can cause personal injury and/or severe vehicle damage, including fire.
4. Proper placement and installation are vital to the performance of this warning device. Install this product so that output
performance of the system is maximized and the controls are placed within convenient reach of the operator so that s/he
can operate the system without losing eye contact with the roadway.
5. It is the responsibility of the vehicle operator to ensure during use that all features of this product work correctly. In use, the
vehicle operator should ensure the projection of the warning signal is not blocked by vehicle components (i.e., open trunks
or compartment doors), people, vehicles, or other obstructions.
6. The use of this or any other warning device does not ensure all drivers can or will observe or react to a warning signal.
Never take the right-of-way for granted. It is your responsibility to be sure you can proceed safely before entering an
intersection, driving against traffic, responding at a high rate of speed, or walking on or around traffic lanes.
7. This equipment is intended for use by authorized personnel only. The user is responsible for understanding and obeying
all laws regarding warning signal devices. Therefore, the user should check all applicable city, state, and federal laws and
regulations. The manufacturer assumes no liability for any loss resulting from the use of this warning device.
Contents:
1 x 3730 Series Surface Mount LED Head
1 x Installation and Operating Instructions
1 x Mounting gasket
2 x Front mounting screws (# 6 x 1 1/4" Self Tapping),
with washers and nuts.
920-0064-00 Rev. B
Installation and Operation Instructions
3730 Series Surface Mount LED Heads
Specifications:
Size:
Input Voltage:
Current Draw: Model 3730: 0.3mA average, 0.7mA peak
Operating temperature range:
3.7"[94mm] length, 1.3"[34mm] width,
1.5"[39mm] height
Model 3730: 12-24 VDC (9-32V)
-40 to +50ºC
Page 1 of 4

Publicidad

loading

Resumen de contenidos para Ecco 3730 Serie

  • Página 1 Installation and Operation Instructions 3730 Series Surface Mount LED Heads 3730 series LED heads are compact yet versatile high intensi- ty directional LED warning lights suitable for mounting any- where on a vehicle. Colorless until illuminated, these discrete LED heads feature urethane encapsulated electronics offering a high degree of environmental and vibration protection.
  • Página 2 The on page 4). This wire may also be connected to mounting location should allow the maximum visibility of other compatible ECCO synchronizing products. the warning device to other road users, while allowing for If unused, leave unconnected and insulated.
  • Página 3 Mounting Brackets (Optional accessories, sold separately.) MOUNTING BRACKET Mount the 3730 on the bracket as shown in the appropriate dia- gram. Push the two 6-32 x 1-1/4 screws through the mounting holes at the front of the unit and through the holes in the rubber mounting gasket.
  • Página 4 This Limited Warranty defines specific legal rights. You may have other legal rights, which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages. 833 West Diamond St Boise, Idaho 83705 Customer Service USA 800-635-5900 UK +44 (0)113 237 5340 AUS +61 (0)3 63322444 www.eccogroup.com © 2007 ECCO 920-0064-00 Rev. B Page 4 of 4...
  • Página 5: Especificaciones

    Instrucciones de instalación y uso, cabezales LED de montaje en superficie, serie 373 Los cabezales LED de la serie 3730 son luces de advertencia LED direccionales, compactas pero versátiles, de alta intensidad, adecuadas para su montaje en cualquier lugar del vehículo. Estos cabezales LED son discretos: incoloros hasta que se iluminan.
  • Página 6: Instalación Y Montaje

    Precaución: Al perforar cualquier superficie del vehículo, con otros productos de sincronización asegúrese de que no haya cables eléctricos, mangueras de ECCO compatibles. Si no se utiliza, déjelo combustible, tapicería, etc. en el área que pudiesen dañarse. desconectado y aislado.
  • Página 7 Soportes de montaje (accesorios opcionales, de venta separada). SOPORTES Coloque la 3730 en el soporte como se muestra en el diagrama DE MONTAJE correspondiente. Empuje los dos tornillos 6-32 x 1-1/4 pasándolos por los orificios de montaje en la parte delantera de la unidad y a través de los orificios de la junta para montaje de caucho.
  • Página 8 833 West Diamond St. Boise, Idaho 83705 Servicio al cliente EE.UU. 800.635.5900 Reino Unido +44 (0)113 237 5340 AUS +61 (0)3 63322444 www.eccogroup.com © 2007 ECCO 920-0064-00 Rev. B Página 4 de 4...
  • Página 9: Caractéristiques Techniques

    Instructions d'installation et d'utilisation Têtes DEL de montage en surface série 3730 Les têtes DEL de la série 3730 sont des lampes d’avertissement DEL directionnelles compactes mais néanmoins polyvalentes, à haute intensité, adaptées à un montage n’importe où sur un véhicule. Sans couleur lorsqu’elles ne sont pas allumées, ces têtes DEL discrètes présentent un système électronique encapsulé...
  • Página 10 Les têtes DEL de la série 3730 doivent être installées sur une surface aussi être relié à d’autres produits de synchronisation plane ou une surface présentant le moins de courbures possible. ECCO compatibles. Si vous ne les utilisez pas, La surface de montage doit donner aux autres automobilistes un laissez-les isolés.
  • Página 11 Supports de montage (accessoires optionnels, vendus séparément.) SUPPORTS DE MONTAGE Installez le 3730 sur le support comme indiqué sur le schéma approprié. Poussez les deux vis 6-32 x 1-1/4 dans les orifices de montage à l’avant de l’unité et dans les trous du joint plat en caoutchouc. Passez les vis auto-taraudeuses dans les orifices ou les fentes du support.
  • Página 12 à l’autre. Certains États n’autorisent pas l’exclusion ou la limitation de dommages indirects ou accessoires. 833 West Diamond St Boise, Idaho 83705 Customer Service États-Unis 800.635.5900 Royaume-Uni +44 (0)113 237 5340 AUS +61 (0)3 63322444 www.eccogroup.com © 2007 ECCO 920-0064-00 Rév. B Page 4 sur 4...

Este manual también es adecuado para:

A3730bktA3730tnkA3730dckA3730winA3730lic3730