Blaupunkt PG4000 Manual Del Usario página 9

Fig.12
ASSEMBLY
ATTENTION!
Follow the steps described below exactly for assembly. Otherwise the spray attachment may be damaged.
Fig.13
th
Fig.15
Place nozzle on the needle with recess downwards. (Pay attention to bulges in the nozzle). (Fig. 13)
•
Place air cap on nozzle. (Fig. 14)
•
Put the jet width adjusting lever into the union nut. (Fig. 15)
y
•
Make sure that the recess on the union nut meshes with the recess on the jet width adjusting lever.
Screw on union nut. (Fig. 16)
•
• Place the container seal from below on the suction tube and slide it over the collar, while turning the container seal slightly.
• Screw the suction tube with the container seal into the body of the gun. Press the container seal to ensure a good seal.
4 3 2 1
Fig.14
Fig.16
Fig.11
Take special care when
cleaning the interstices
on the needle (Fig. 11)