Hotpoint Ariston MCA 16/HA Instrucciones De Uso página 14

Maintenance and care
Descaling
NA
The product comes with one bottle of the decalcification
fluid which is enought for the first decalcification process.
Scale normally forms with use of the appliance.
Descaling is necessary every 3 - 4 months (depending
on the water hardness and the use of the water filter)
when there is a reduction in water flow or when the
machine displays the following message:
READY FOR USE
DECALCIFY
! If you want to descale the machine yourself, you
can use a non-toxic and/or non-harmful descaling
product for coffee machines, commonly available in
the shops. Hotpoint-Ariston descaling product is highly
recommended.
! Never use vinegar as a descaler.
For more information on where to purchase the
decalcifiation fluid, please email to:
information@u8intl.com or call 1-888-426-0825.
! Remove the water filter before descaling (where
installed).
Follow the instructions for descaling:
3. Press the key to select the function. The display
shows:
DESCALING
NO
4. Using the
DESCALING
YES
14
1. Mix the descaling
product with water
following the instructions
on the product package,
and fill the tank with
water.
2. Turn on the machine
at the main switch.
keys, select:
The machine will start an automatic descaling cycle
with pauses programmed by the manufacturer and
automatically managed by the machine.
The display will show:
MACHINE IS DESCALING
7. At the end of the cycle, dispensing of the descaling
solution will stop and the display will show:
RINSE MACHINE
FILL WATERTANK
RINSE MACHINE
PRESS WATER KEY
MACHINE IS RINSING
5. Direct the steam spout
towards the drip tray.
6. Place a suitably sized
container below the
steam spout and press
the key.
8. Rinse the water tank
thoroughly and fill it with
fresh drinking water.
Replace the tank and
close the front panel.
The display will show:
9. Place a suitably sized
container below the
steam spout and press
the key.
Rinsing of the machine
circuits begins and the
display will show: