Atlantis OnePower A03-PE602 Manual Del Usuario página 23

FRA
The crossed-out wheeled bin symbol printed on the unit label or unit packaging
indicates that this equipment must not be disposed of as unsorted municipal waste
but it should be collected separately.
The waste of electric and electronic equipment must be treated separately, in order
to ensure that hazardous materials contained inside the equipment are not buried
thereby providing potential future problems for the environment and human health.
Moreover, it will be possible to reuse and recycle some parts of the waste of electric
and electronic equipment, contributing to reduce the quantities of waste to be
disposed of and the depletion of natural resources.
As user of this equipment, you are responsible to return this waste of electronic
equipment to an authorised collection facility set up by your Municipality. More
detailed information on your nearest collection centre can be obtained from your
Municipality or from other competent local entities.
If you are replacing the old equipment with a new equivalent product, the distributor
must take-back the old equipment free of charge on a one-to one basis as long as
the equipment is of equivalent type and fulfilled the same functions as the supplied
equipment.
Your rôle in participating to the separate collection of waste of electric and electronic
equipment is essential to ensure that environmental protection and human health
objectives connected to a responsible treatment and recycling activities are achieved.
PS.: The above mentioned information are reported herewith in compliance with Directive
2002/96/CE, which requires a separate collection system and specific treatment and disposal
procedures for the waste of electric and electronic equipments (WEEE). For further and more
detailed information, we invite you to visit our website at www.atlantis-land.com
Declaration of Conformity ( )
Hereby, Atlantis, declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive 2006/95/EC (LV), 204/108/EC
(EMC) and:
Low Voltage Directives:
 IEC 60950-1:2006+A11:2009+A1:2010
 EN 62040-1-1:2008
EMC Directives:
 EN 62040-2:2006
 EN 61000-4-2:2009
 EN 61000-4-3:2006+A1:2008+A2:2010
 EN 61000-4-4:2004+A1:2010
23