Zyxel PowerLine PLA402 v2 Guia De Inicio Rapido página 5

2 Connect the PLA402 v2 to a power outlet. Your power cable and outlet may look
different.
• You can also connect a coaxial cable to a coaxial outlet.
The power ( ) light should be on and the Ethernet ( ) light should be on or blinking. If
these lights are not on, unplug your device and recheck your hardware connections.
• If the HomePlug (
HomePlug AV network is ready for use. However, the PLA402 v2s may both be using
the default network name HomePlugAV. This well-known network name allows access to
your HomePlug AV network. You can make your network name more secure by going to
the next section to set up a HomePlug AV network with ENCRYPT.
• If the HomePlug (
AV network with ENCRYPT.
ENGLISH
) lights turn on the first time you set up your PLA402 v2s, your
) lights do not turn on, go to the next section to set up a HomePlug
5