Cassette Type Installation - Electrolux EXO36HEIWE Manual De Instalación

14 www.electrolux.com
2.11 Indoor unit installation
1. Pass the piping through the hole in
the wall.
2. Hook the indoor unit onto the upper
portion of installation plate(Engage
the indoor unit with the upper edge
of the installation plate). Ensure the
hooks are properly seated on the
installation plate by moving it in left
and right.
3. Piping can easily be made by lifting
the indoor unit with a cushioning
material between the indoor unit and
the wall. Get it out after finish piping.
4. Press the lower left and right side of
the unit against the installation plate
until hooks engages with the their
slots.

3. CASSETTE TYPE INSTALLATION

3.1 Tools needs for installation
1. Level gauge
2. Screw driver
3.
Electric drill
Hole core drill (ø55mm / ø70mm)
4.
5. Flaring tool set
6.
Specified torque wrenches
7. Spanner (half union)
8. A glass of water
9. Hexagonal wrench (4mm)
3.2 Accessories
Number
1
2
3
4
Name of Accessories
Installation manual (Only for universal indoor unit for
Multi & Mono)
Owner's manual (Only for universal indoor unit for
Multi & Mono)
Remote controller
Battery (AAA 1.5V)
Fig.10
10. Gas-leak detector
11. Vacuum pump
12. Gauge manifold
13. Users manual
14. Thermometer
15. Multimeter
16. Pipe cutter
17. Measuring tape
Upper hook
Mounting
plate
Cushioning
material
Quantity
1
1
1
2