Safety Information; Preliminary Recommendations; General Information; Package Content - WEG CFW100 Guía De Instalación, Configuración Y Operación

1 SAFETY INFORMATION

1.1 SAFETY INFORMATION
NOTE!
Only use the CAN communication module
„
(CFW100-CCAN) on WEG CFW100 series
inverters with firmware from version V2.20
up (see P023).
For further information on DeviceNet
„
communication protocol, contact the
manufacturer (WEG).
It is recommended to read the CFW100
„
user manual before installing or operating
this accessory.
This guide contains important information
„
regarding the proper understanding and
correct operation of this module.

1.2 PRELIMINARY RECOMMENDATIONS

ATTENTION!
Always disconnect the general power
„
supply before connecting or disconnecting
the accessories of the CFW100 frequency
inverter.
Wait for at least ten minutes for the full
„
discharge of the inverter.

2 GENERAL INFORMATION

This guide provides directions for the installation,
configuration and operation of the CAN communication
module (CFW100-CCAN).

3 PACKAGE CONTENT

Upon receiving the product, check if the package
contains:
Accessory in anti-static package.
„
Installation, configuration and operation guide.
„
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
CAN Communication Module