Specifications And Features; Safety Instructions - QuickCable RESCUE LiFePO4 800 Instrucciones

Specifications and Features

AC charging adapter
cord 15V, 1A
Internal Battery
USB Output 2 x Ports
Peak Current/Start Current
Battery Charger/Maintainer
Safety/Work Light
AC Input Charge Port
DC Input Charge Port
Overload protection
Reverse polarity protection
Backward current protection
Over-discharge protection
1
Accessories
USB to micro DC charging adapter
USB cord cord 12V, 1A
Lithium Iron Phosphate (LiFePO4)
5VDC, up to 2.4A maximum
1600A peak/800A cranking
14.4V @ 1A
4W White Flashing/White work light
15V @ 1A
12V @ 1A
Overheat protection
Short circuit protection
Over-charge protection
Low Temperature protection

Safety Instructions

Rescue® LiFePO4 Portable Power Packs are capable of delivering significant current to start
cars, light trucks, ATV's, boats, lawn and garden equipment and other 12V equipment. These units
feature a 5V USB. The unit also features a safety/work light that can be set to continuous on, or
flashing mode. A LCD display screen provides an indication of the reserve power level and shows
when the unit is being charged and fully charged. Each LCD display will also prompt an error
protection code if the unit is connected incorrectly, short circuited, overheated, overloaded or if
not battery voltage is found. LiFePO4 models include a rugged hard plastic storage case for safe
transportation, 12V power socket, integrated jump cables and clamps and 12V adaptor cable.
1. LCD display
2. Power switch
3. Override button
4. Engine start button
5. Battery charger/
maintainer button
WARNING – Risk of Explosion or Fire
!
1. Failure to follow these instructions may result in personal injury, destruction of the power pack,
or damage to your vehicle.
2. Read owner's manual before use.
3. Wear safety goggles whenever working around vehcile batteries.
4. Wear gloves and protective clothing.
6. Safety/Work light button
7. Test function button
8. USB output
9. Charge input
10. Light
11. Jumpstart clamps
2