Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
The hot water may now be poured safely through the spout (1) into another container.
Safety cut-out
This kettle is equipped with a safety cut-out to protect the appliance from damage in case of
inappropriate use. Should the appliance be accidentally operated without water, or if all the water has
evaporated, the safety cut-out will automatically switch off the heating element.
In case a case, remove the plug from the wall socket immediately and refill the kettle only after an
adequate cooling down period about 15-20 seconds.
Decalcifying
Should the appliance switch off before reaching boiling point, this is sign that decalcifying is necessary.
Any regular descaling agent may be used, provided the relevant instructions are observed. Don't fill the
kettle to the upper mark to avoid spillage if the descaling agent causes the water to foam
To clean the kettle thoroughly of any decalcification residues, let is go through several boiling cycles,
using clean water with each cycle. Rinse the kettle with clean water afterwards.
CLEANING AND CARE
Before cleaning the appliance, ensure it is disconnected from the power supply and has cooled down
completely
Don't use abrasives or harsh cleaning solutions
Don't immerse the base or the kettle in any liquid. To clean the exterior, a slightly damp, Lint-free cloth
may be used.
It is advisable to remove lime deposits form the kettle at regular intervals.
SPECIFICATIONS
Supply voltage: 220-240V
Power consumption: 1850-2200W
Volume: 1.8L
P-4
Publicidad
Tabla de contenido
