TaoTronics TT-BA014 Guia Del Usuario página 7

Pair with Two Devices at One Time
In TX Mode
In TX mode, the adapter is able to pair with two pairs of Bluetooth stereo earphones /
speakers at the same time.
1. Pair the adapter with the first audio receiving device as instructed above.
2. Set the second audio receiving device into pairing mode. Tap the Multifunction Button
on the adapter twice until the TX indicator keeps flashing. Connection will be
completed after approximately 30 seconds.
Note:
• Please make sure there are no other Bluetooth devices within range during the connection.
• When paired with two devices, both can play music at the same time.
In RX Mode
In RX mode, the adapter is able to pair with two Bluetooth devices like phones and tablets
at the same time.
1. Pair the adapter with your first device as previously instructed.
2. Tap the Multifunction Button twice to bring the adapter into pairing mode, pair the
second device with it as instructed above.
Note: When connected with two devices, only one device can play music at any time.
You have to stop the music on one device to play that on the other.
Bypass Mode
Set the adapter to Bypass mode, and the Bypass indicator will stay solid on.
Operation
Function
AUX indicator keeps on
AUX Input to AUX Output
Tap the OPT / AUX Mode Switch Button once, and the
OPT Input to OPT Output
OPT indicator keeps on
Tap the OPT / AUX Mode Switch Button again, both the
AUX Input to OPT Output
OPT and AUX indicators will stay on with the AUX
indicator lighting up first.
Tap the OPT / AUX Mode Switch Button one more time,
OPT Input to AUX Output
both the OPT and AUX indicators will stay on with the
OPT indicator lighting up first.
Auto Shut off
• In TX mode, the unit will shut off automatically if the battery level is low.
• In RX mode, the unit will shut off automatically if the battery level is low or there is no
connection in 10 minutes.
05/06