Descargar Imprimir esta página

Maintenance And Cleaning - Ibx H01 Manual De Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

7. Faults
Instruments cannot be switched ON
Check whether the power line is unplugged.
-
Stirring speed cannot reach set point
Excessive medium viscosity may cause abnormal motor speed reduction.
-
Heating does not after setting the temperature or stirring does not start by adjusting the control knob.
Check the control panel has damages which may have arisen during transport.
-
If these faults are not resolved, please contact the manufacturer/supplier.

8. Maintenance and Cleaning

Proper maintenance can keep instruments working properly and lengthen the lifetime.
Do not spray cleanser onto the instrument when cleaning.
Unplug the power line when cleaning.
Only use recommended cleansers:
Before using any other cleaning or decontamination methods, the user must verify with the manufacturer that the
method will not harm the equipment. Wear proper protective gloves while cleaning the equipment.
If maintenance service is needed, the equipment must be cleaned to avoid contamination from hazardous substances
and shipped in its original packing carton.
Use the instrument in a dry, clean, environment with a stable temperature.
Note:
• Increase the stirring speed gradually.
Reduce the speed if:
- Too high speed makes the stirrer break.
- The equipment's functioning is irregular or it is
not standing stable on the heating plate.
• Make sure the power supply and voltage are
enough for the system.
• Make sure the power line is at a safe distance
from the heating plate.
• Do not cover the equipment.
• In case the equipment breaks down, cut off the
power supply right away.
Dyes
Construction materials
Cosmetics
Food products
Fuels
Isopropyl alcohol
Water
containing
Isopropyl alcohol
Water
containing
Isopropyl alcohol
Water containing surfactants
Water containing surfactants
Table 3
7
surfactants
/
surfactants
/

Publicidad

loading

Productos relacionados para Ibx H01