Sera pond fil bioactive Información Para El Usuario página 10

Troubleshooting
Problem
Water is green. The sera pond fil
bioactive pressure filter is unable to
make a detectable improvement even
after 14 days
Water is cloudy but not green, greenish
brown or yellowish green, sera pond fil
bioactive does not remove the
cloudiness
Green water
No water is flowing out
Technical Data
Filter canister volume
Filter media
max. pressure
max. flow rate
sera pond fil bioactive
Model
sera pond fil bioactive
sera pond fil bioactive kit 6000
sera pond fil bioactive kit 12000
Possible cause
Underestimated pond size/water
amount
Clogged filter system
Water flow rate too low
The cause of cloudiness not or not
sufficiently being removed is often the
filter material being cleaned too
frequently
Floating algae
sera pond fil bioactive is set to
backwashing "CLEAN"
Pond pump off
Pond pump clogged/damaged
approx. 35 liters (9.2 US gal.)
6 l (1.6 kg / 3.5 lb.) sera siporax pond,
equivalent to approx. 200 l (53 US gal.) of
common ceramic rings
3 sponge filter rings fine, medium, coarse
1 bottom filter ring, coarse
0.4 bar [5.8 psi. (4 m / 13.1 ft. water
column)]
15,000 l/h (3,960 US gal.)
Item No.
08131
08133
08134
Possible solution
Connect additional sera pond
fil bioactive pressure filter
Clean according to the directions for use
Check water flow rate and possibly
clean sera pond fil bioactive according
to the information for use, and/or clean
the pump
Clean sera siporax pond only if there
is visible deposited sludge on the filter
tubes
Combine sera pond fil bioactive with a
sera pond UV-C System 55 W
Turn the rotary switch back to "PUMP"
for operation
Switch on
Clean, repair or replace pond pump
Pond size
up to 12,000 l
(3,170 US gal.)
up to 6,000 l
(1,585 US gal.)
up to 12,000 l
(3,170 US gal.)
10
With pond pump
sera pond PP 6000
sera pond PP 12000