Technical Specifications - Riello HRT-177RS Manual De Instalacion Y Uso

PAR. DESCRIPTION
RADIO FREQUENCY: The product uses a
radio frequency value of 868MHz as required
by the CE regulation. In the case this value in-
EN
terferes with other home appliances having the
same, it is possible to have a small modifi cation
of the radio frequency. Default value is CH5
that correspond to 868.0MHz, the choices are
between CH0 and CH9. CH0 = 867.5MHz .....
06
CH9=868.4MHz. After the selection of a new ra-
dio frequency value it is necessary to proceed
to a new encoding (see encoding parameter
05). WARNING! The modifi cation of the radio
frequency must be a rare operation to do only if
the errors in are recognized to be not due to a
long distance or low batteries.

TECHNICAL SPECIFICATIONS

RECEIVER
Linked with transmitter via RF: frequency 868 MHz
Power rating: 230 VAC ± 10%, 50 Hz
Power consumption: 1,2 W
Relay switching capacity:
• Min 1mA,
• Max 2A at 30 VDC
• Max 0,25A at 230 VAC
TRANSMITTER
Linked with receiver via RF: frequency 868 MHz
Power rating: 2 x 1,5AAA - Alkaline batteries
Temperature setting: 3°C to 35°C in 0.2°C increments.
Display temperature: -9,9°C to 50°C in 0.2°C increments.
Install transmitter and receiver in an environment with nor-
mal pollution level.
Radio range 40 m in free space, (the range can be altered
depending on the installation conditions and on the electro-
magnetic environment).
The manufacturer reserves the right to change specifi ca-
tion without prior notice - Consumers statutory rights are
not affected
22