Pulsar EPS3I Instrucciones página 6

Storage and maintenance
Store the battery pack in a cool, dry, well aerated place.
Store the Battery packs in a charged condition.
Disposal
Regulations vary for different countries. Dispose of in accordance with local
regulations.
problem
possible cause(s)
When the charger is
The AC mains socket is out
plugged into the AC of operation.
mains, the LED light
does not glow.
An external device You are using a device with
connected to the a power exceeding the fixed
Battery pack, does limit.
not function.
Make sure that the contact
of the battery and external
device is intact.
EPS will not operate. Battery's charge is below
the critical level of operating
voltage (deep discharge).
The Manufacturer warrants its products against defects in materials and
workmanship for a period of one year from the moment of purchase or from the
manufacturing date if there is no receipt to prove purchase.
To avoid any problems, please become familiar with the device's user manual.
The warranty does not cover any external damage to the device.
The manufacturer has the right to render the warranty null and void
in the following cases:
if the device has been modified or tampered with,
if the device has been dropped or has marks of mechanical or chemical
damage,
if the device has been tampered with by unauthorized repair,
if the device has been damaged as a result of fire or natural disasters,
if the device has been damaged as a result of liquids or other
substances getting inside.
In the event of activating the warranty repair service, please contact the
distributor where the device was purchased.
5
сorrective action
Plug the charger to an operable AC
mains socket.
Use the EPS5 instead of the EPS3I.
Substitute the external device with
lower power.
Check the contact of the external
device if necessary.
Use the supplied charger to plug
the battery to AC socket and let it
charge for a long period of time
(5-6 hours).
Any product returned under this warranty should be packaged in a sturdy,
outside shipping carton, to prevent damage in transit.
In addition, it must be accompanied with the following items:
Letter explaining the unit's problem.
Copy of the original receipt showing when and where the product was
purchased.
Return Shipping Information, including return address and contact
person.
Please contact our service centre with any questions you might have at
e-mail: euservice@pulsar-nv.com
6