Star 4H05A05001 Manual Del Usuario página 10

ASSEMBLY INSTRUCTRIONS
2b. Clamp pipe onto barbed end of male
adaptor with two hose clamps (sold
separately). (Fig. 2b)
3. Firmly clamp the torque arrestor to the pipe
approximately 2 to 4 ft. above the pump,
using the two clamps provided with the
torque arrestor. (Fig. 3)
4. Typical installations include the following
components. Purchase these items
separately depending on your need.
(Fig. 4)
Discharge pipe - delivers water to home
Well seal or pitless adapter - keeps debris out
of well
Safety rope - prevents pump from falling
Check valve - keeps water in pipe
Electrical cable - connects to house
electricity
Torque arrestor - keeps pump stable
Drop pipe - connects pump to discharge
Well casing - holds all components
10
Copyright © 2011 Star Water Systems. All rights reserved.
2b
3
Torque
Arrestor
Discharge Pipe
4
Well Seal or Pitless Adapter
Safety Rope
Spring-Loaded Check Valve
(Recommended every 100 ft.)
Electrical Cable (Secured to drop
pipe with tape or clamps every
10 ft.)
Torque Arrestor
Drop Pipe
Well Casing
IL1172
Approx. 4 ft.