Shelves And Bins - Monogram ZIC360 Manual Del Propietário

SHELVES AND BINS

PAN REMOVAL
To remove a pan, pull it out and lift the front up and out of
the wire holder. Lift the back up and out.
To replace a pan, place the back of the pan in the wire
holder, making sure the indentations at the back of the pan
fit into the back of the wire holder. Then lower the front of
the pan into the wire holder. Press firmly on the top of the
pan until it snaps into place.
ADJUSTABLE SHELVES
Tempered glass shelves in the fresh food compartment
enable you to make efficient shelf arrangements to fit your
family's food storage needs.
To remove shelves: Tilt shelf up at front, then lift it up and
out of tracks on rear wall of refrigerator.
To replace shelves: Select desired shelf height. With shelf
front raised slightly, engage top lugs in tracks at rear of
cabinet. Then lower front of shelf until it locks into position.
CAUTION
Handle glass shelves carefully. Glass
shelves and covers may break if exposed to impact, such
as bumping or dropping. Tempered glass is designed to
shatter into many small pieces if it breaks.
ATTENTION
précaution. Les tablettes et couvercles en verre peuvent se briser
se brise, le verre trempé est conçu pour se fracturer en un grand
nombre de petits éclats.
49-1000459 Rev.0
PRECAUCIÓN
Sostenga las repisas de vidrio con
cuidado. Las repisas de vidrio y las tapas se pueden romper
si son expuestas a impactos, tales como sacudones o caídas.
El vidrio templado está diseñado para destruirse en pequeñas
15