Sinbo SCO 5033 Manual Del Usuario página 12

as it may cause fire. When not in use, unplug the cord from the power outlet.
Care must be taken on the seals to avoid deformation. Fail to do so may prevent the
product from working properly.
PRODUCT SPECIFICATIONS
Model: SCO 5033
Power Supply: 230V~50Hz
Power: 900W
Volume: 5L
Caliber of inner pot: 22cm
Working pressure: 0-70kPa
Limit pressure: 90kPa
Warm temperature: 60-80˚C
PRODUCT INSTRUCTIONS
You're about to experience a better , faster, and healthier way of cooking. Our Electric Pressure Cooker seals in steam
to cook hotter and faster, and it seals in nutrients as well. Cook in less water and experience textures and tastes that
are simply sensational. Features easy touch-button settings, a countdown timer, and a cooking pot big enough for a
pot roast with all the fixings. Enjoy!
We assures unprecedented safety with 10 proven safety mechanisms and patented technologies. The range from lid
close lock pin, electronic pressure and temperature control, dry burn detection and automatic shutoff, over-pressure
crush plate, to temperature and electrical current limiting fuse.
BEFORE FIRST USE
Before first use, please take out all accessories from the package and read this Manual carefully, pay particular
attention to operational instructions and cautions to avoid any injury or property damage.
DISASSEMBLY/ASSEMBLY OF ANTI BLOCK SHIELD AND SEAL
Disasembly and assembly
of Anti Block shield
Disassembly and
Assembly of seal
Prior to each use, inspect to make sure the seal and anti-block shield are mounted in the lid.
After use, remove any foreign object from the seal and anti-block shield.
Keep clean to avoid odor.
Never pull the seal by force, as pull deformation may affect sealing and pressure effect.
A damaged seal should not be used, and unit shall be sent to the service center for replacement.
PARTS DESCRIPTION
1. Lid Handle, 2. Lid, 3. Top Cover, 4. Pressure Limit Valve, 5. Steel Valve Core, 6. Float Valve, 7. Floating Valve,
8. Removable Cooking Pot, 9. Control Panel, 10. Stationary Pot, 11. Base, 12. Pot Handle, 13. Housing, 14. Power
Cable, 15. Heating Plate, 16. Anti Block Shield, 17. Sealing Ring of Steel Valve Core, 18. Sealing Ring of Lid
Safe Lid Opening
1. Disconnects the power or the power plug.
2. Releasing pressure
PRECAUTIONS
Disasembly
Screw off upward
counterclockwise
Anti Block
Shield
Disasembly
Lift up
Seal
- 11 -
Assembly
Screw up downward
clockwise
Assembly
Press down