Power-Mate ®Care - Kenmore 116.26312 Manual Del Propietário

POWER-MATE ®CARE
Always follow all safety precautions when
cleaning and servicing the Power-Mate ®.
IbWARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
performing maintenance to the
vacuum cleaner, Failure to do so could
result in electrical shock or personal
iinjury from vacuum cleaner suddenly
starting,
TO REMOVE BELT
1, Turn Power-
Mate ® upside
down,
2. Unscrew the two
(2) Power-Mate ®
cover screws.
3. Turn Power-
Mate ® right side up.
Press handle
release pedal and
lower the swivel.
Lift rear latches up.
_®
4. TO remove cover,
grasp the sides and pull
out.
5. Depress tabs
on rear of
agitator cover
and rotate
forward to
release from the
Power-Mate ®
base.
Agitator
Cover
Tabs
6. Lift agitator
assembly out
and remove
worn belt.
End Cap
7. Check and clean end cap areas. See
AGITATOR ASSEMBLY for picture of
complete agitator assembly.
15