Publicidad
Idiomas disponibles
Idiomas disponibles
TO CLEAN AGITATOR:
NOTE: In order to keep cleaning efficiency
high and to prevent damage to your vacuum
cleaner, the aqitator must be cleaned every
time the belt is chanaed.
The agitator must also be cleaned according
to the following schedule:
V_!_cuum Cleaner
Use
HEAVY
-
(used daily)
MODERATE
-
(used 2-3 times/week)
LIGHT -
(used 1 time/week)
Clean A aitator
every week
every month
every 2 months
IM PORTANT
Disconnect
vacuum cleaner from
electrical
outlet. Check and remove hair,
string and lint build-up frequently
in the
Power-Mate _ agitator and end cap areas.
Remove any dirt or debris
in the belt path
area or in the brush roller area.
Carefully remove any string or debris
located on the agitator, or end caps.
AGITATOR ASSEMBLY
Belt Pulley_
Brush Unit
TO REPLACE BELT
1, Install new
belt over motor
drive, then
over belt
pulley.
NOTE: See
PARTS AND
FEATURES
for
Belt number.
End Cap Agitator
2. Place agitator
assembly back into
Power-Mate®:
3. Reinstall
agitator cover
by lining up
the front tabs
and slots and
rotating
downward
until the
latches snap
into place.
Agitator Cover
Tabs
4. Line up front
\
)_,",,_/
_
of cover and
base. Rest
cover on front
edge of base as
shown.
Cover
Base
5. Rotate cover
back. Press cover
firmly until side and
rear tabs snap into
place.
6. Turn Power-Mate®upside down and
replace two (2) cover screws.
16
Publicidad
