Installation. Commissioning; Arrangement; Electrical Installation - COPELE DOSIDOG Manual De Isntrucciones Y Del Usuario

7.- INSTALLATION. COMISSIONING

7.1. Arrangement

The surface over which the machine is going to be installed
must be horizontally levelled, uniform and stable.
The dog has to be able to reach the bowl with ease.
Check that the bowl and the interior ramps are correctly
placed.
Attach the hopper to the wall using the drills that can be
found on its back side.
The machine is not intended to be installed outdoors.

7.2. Electrical installation

Check that voltage and line rate correspond to the data given on the plate
(220 V, 50 Hz) and that the electrical power system withstands the maximum
consumption of the machine (3.6 W). Connect the machine to the electricity
supply. A 220 V AC-12 V DC power transformer is provided. The transformer
has to be plugged for the programmer to work. If a sudden shutdown occurs,
the memory of the programmer preserves information such as time and
previously saved programs.
All electrical appliances fully adhere to the regulations in force and have all
the certificates that are needed for a commercial use. Since the automatism
consists of several electrical components, there is a risk of failure, and electrical
hazard is also present.
Do not operate the connections of the programmer. If connections are not
correct, the programmer can get damaged.
18
DOSIDOG
INSTALLATION
ADJUSTMENT
USER MANUAL