Power Connection; Connecting Power - Nortel Networks BayStack 10 Instrucciones Para La Instalación

208558B.fm Page 3 Thursday, April 26, 2001 11:03 AM

Power connection

The BayStack 10 PSU can be turned on and off with the buttons on the front panel of the unit. In
case of emergency, disconnect the power cord on the back of the unit from the AC power outlet.

Connecting power

When used without a UPS installed, the BayStack 10 Power Supply Unit does not have a power on/
off switch. When you connect the AC power cord to a suitable AC power outlet, the BayStack 10
PSU powers up immediately.
Warning: Removal of the power cord is the only way to turn off power to this device. The
power cord must always be connected in a location that can be accessed quickly and safely
in case of an emergency.
3