Mounting The Unit; Flush-To-Ceiling - Broan FRESH IN PREMIUM FIN-180P Instrucciones De Instalación

3.1 M
OUNTING THE
��
When choosing a location for this unit, keep in mind that maintenance will have to be performed by
the end user on a regular basis. Choose an easily accessible location and plan for a 14-in. clearance
for the door to open.
CEILING HUNG
VH0153A
14¼" clearance
3.1.1 F - -C
LUSH TO EILING
��
If the finishing will be done using the optional decorative finishing ring (part no. FIN-R1015), the
springs included in the optional kit should be installed before installing the brackets.
1. Using 4 screws no. 8-18 x 0.375 in., install the brackets on the unit following the diagram below to
adapt to the thickness of the ceiling.
SCREW POSITION ACCORDING
TO CEILING THICKNESS
2. Using 4 screws no. 10-12 x 0.625 in., install the unit between the joists. This unit is designed to fit
between 12-in. cc joists. If the joists are closer, do not force the unit in, choose an other installation
method. Should the joists be more than 12" apart, shims can be used.
��
Prior to painting, clean the metal housing using solvent and the plastic decorative liner using water.
U
NIT
ATTIC MOUNTED
12"
VD0466
X = 1 3/8"
X = 1 1/4"
X = 5/8"
X = 1/2"
VD0471
FLUSH TO CEILING
With optional
VD0467
decorative trim
UNDER CEILING
10"
10¼"
VH0154
X
8
WALL MOUNTED
12"
VH0152
VD0470
10"
10"