Step 21
1
D107
Q
Groove
Insert the DRAWER SIDES (D107 and D108) at
å
an angle into the slot at each end of the RIGHT
DRAWER FRONT (Q).
3
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
Fasten the DRAWER BACK (D69) to the DRAWER SIDES (D107 and D108). Use four BLACK 1-9/16" FLAT
å
HEAD SCREWS (30S).
NOTE: Be sure the DRAWER BOTTOM (D969) inserts into the groove of the DRAWER BACK (D69).
å
Repeat this step for the remaining drawer using the LEFT DRAWER FRONT (R).
å
Page 26
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
D108
D69
D107
D969
VIEW THE T-LOCK BOX VIDEO
2
U n fi
n i s h
s u r
e d
f a c
e
D107
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the DRAWER BOTTOM (D969) into the grooves
å
in the DRAWER SIDES (D107 and D108) and RIGHT
DRAWER FRONT (Q).
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
D108
423004
With the palm of
your hand, tap the
DRAWER BOTTOM
down into the groove.
D969
Q
D108
30S
(8 used in this step)
www.sauder.com/services